Free Testking HP0-P20 HP-UX 11i v3 System Exam Braindump
Free Testking HP0-P20 HP-UX 11i v3 System Exam Braindump, HP0-P20 Exam. HP-UX 11i v3 System Administration.
2. What are the main components of DNS? (Select three.)
A. Name Servers
B. Hierarchical Name Space
C. Name Clients
D. Resolvers
E. ARPA Name Space
F. Start of Authority (SOA)
Answer: ABD
3. Which command shows the general status of a Serviceguard cluster?
A. cmclstat
B. cmshowcluster
C. cmviewcl
D. cmviewconf
E. cmgetconf
Answer: C
4. Which servers support HP-UX 11i v3? (Select two.)
A. HP9000 PA-RISC servers
B. HP ProLiant servers
C. HP Integrity servers
D. HP Integrity NonStop servers
Answer: AC
5. Which commands, run from the VM Host command line, can be used to turn on an Integrity Virtual
Machine? (Select two.)
A. hpvmrun -P vm1
B. hpvmconsole -P vm1 start
C. hpvmconsole -P vm1 -c pc -on
D. hpvmmodify -P vm1 start
E. hpvmconsole -P vm1 -init
F. hpvmstart -P vm1
Answer: CF
Free Testking 000-002 Tivoli Storage Productivity Center V4.1 Exam Braindump
Free Testking 000-002 Tivoli Storage Productivity Center V4.1 Exam Braindump, 000-002 Exam IBM Tivoli Storage Productivity Center V4.1 Implementation.
Section 1 – Planning
Given the customer’s business objectives and storage environment, based on the preinstallation Technical and Delivery Assessment (TDA) document (formerly Solution Assurance Review), gather and analyze the customer’s storage management requirements so that a solution that meets customer expectations can be implemented.
With emphasis on performing the following tasks:
Gather and analyze the customer’s storage management requirements.
Gather and analyze the customer?s data reporting needs.
Gather and analyze the customer?s storage area network (SAN) design and deployment.
Gather and analyze the customer?s performance reporting needs and analysis.
Gather and analyze the customer?s needs to data replication.
Review and validate the information with the customer.
Given the customer’s IBM Tivoli Storage Productivity Center (Tivoli Storage Productivity Center) requirements, based on the TDA document, verify software and hardware resources for the Tivoli Storage Productivity Center server, Agent Manager, and CIM/OM server are available so that Tivoli Storage Productivity Center server and Agent Manager can be successfully installed.
With emphasis on performing the following tasks:
Verify supported OS for the Tivoli Storage Productivity Center server.
Verify Tivoli Storage Productivity Center server resources are sufficient.
Verify supported OS for the Agent Manager server.
Verify Agent Manager server resources are sufficient.
Verify correct Tivoli Storage Productivity Center installation media.
Given the customer’s SAN design which includes switches disk, tape, SAN, and any devices connected to the fabric, based on the TDA document, verify firmware levels of all hardware so as to ensure compliance with TPC.
With emphasis on performing the following tasks:
Identify disk sub-systems.
Identify CIM/OMs already deployed.
Identify HBA and SAN switches.
Identify tape libraries.
Validate hardware firmware levels.
Given the customer’s storage management requirements, identify agent candidates and types, and based on the TDA document, verify that they meet supported hardware/software prerequisites, so that Tivoli Storage Productivity Center agents can be successfully installed if needed.
With emphasis on performing the following tasks:
Identify agent candidates.
Verify agents meet hardware and software prerequisites.
Determine agent distribution methodology.
Given the customer requirements for managing file systems, databases, and devices, identify and verify required databases and operating system user IDs so that the customer’s environment can be properly discovered, probed, and scanned.
With emphasis on performing the following tasks:
Identify and verify required databases.
Verify operating system user IDs.
Given management’s commitment, document the customer requirements (environment, resources, components, and user base) so that an architectural document can be created.
With emphasis on performing the following tasks:
Document the customer requirements (environment, resources, components, and user base).
Gather automated action requirements.
Identify integration points with other products.
Define user base.
Define exit criteria for a successful deployment.
Create an architectural document.
Given management’s commitment during the kick-off meeting, create a task list that maps solutions to products so that a project plan can be developed.
With emphasis on performing the following tasks:
Create a task list.
Map customer requirements to product functions.
Assemble resources to be used in projects.
Create a project plan.
Section 2 – Installation
Given a customer environment where IBM Tivoli Storage Productivity Center (Tivoli Storage Productivity Center) is deployed and running successfully, determine the current product release levels installed so that an upgrade to the latest release of Tivoli Storage Productivity Center can be performed.
With emphasis on performing the following tasks:
Verify current Tivoli Storage Productivity Center release levels.
Check hardware Pre-Requisites.
Verify current DB2 release levels.
Determine if current Tivoli Storage Productivity Center release is able to be upgraded per customer requirements.
Determine if current DB2 release is compatible with Tivoli Storage Productivity Center you are upgrading to.
Verify all SAN attached hardware firm levels and confirm they are supported by Tivoli Storage Productivity Center.
Verify all SAN switches hardware / firm ware levels and confirm they are supported by Tivoli Storage Productivity Center.
Obtain version information for any deployed CIMs and confirm they are supported by Tivoli Storage Productivity Center.
Obtain current Tivoli Storage Productivity Center release.
Verify customer has correct license.
If needed obtain current DB2 release.
Understand which additional components will be installed with TPC 4.1 that were not installed with a previous level of TPC.
Perform upgrade.
Run any subsequent tasks (migrate DB script).
Verify upgrade.
Given that DB2 needs to be installed, determine systems resources and logon authority, so that DB2 can be successfully installed.
With emphasis on performing the following tasks:
Verify if system resources and access are available.
Verify RDBMS listening port.
Verify logon authority.
Install DB2.
Given the appropriate media, perform installation steps using an installer method so that Tivoli Agent Manager for Tivoli Storage Productivity Center is successfully installed and running
With emphasis on performing the following tasks:
Check HW and SW Pre-Requisites
Check for latest technical resource flashes on the Tivoli Storage Productivity Center support Web site
Perform installation steps using the appropriate operating system installer.
Given Tivoli Storage Productivity Center media, perform installation steps using an installer method so that the Tivoli Storage Productivity Center server is successfully installed and running.
With emphasis on performing the following tasks:
Check HW and SW Pre-Requisites
Check for latest technical resource flashes on the Tivoli Storage Productivity Center support Web site.
Perform installation steps using the appropriate operating system installer.
Log in to Tivoli Storage Productivity Center GUI to verify installation.
Given a successful installation of the Tivoli Storage Productivity Center server, determine if errors exist in the installation logs, so that the installation for the Tivoli Storage Productivity Center Data Server, Device server, Data agent, and in-band Fabric agent is verified.
With emphasis on performing the following tasks:
Start the Tivoli Storage Productivity Center GUI.
Run a discovery.
Go to the appropriate log directory in Windows or UNIX.
Review log file for server and agent. If errors are found, take appropriate troubleshooting steps.
In Tivoli Storage Productivity Center GUI, go to administrative services and verify that all services are up.
In Tivoli Storage Productivity Center GUI, go to administrative services/agents and verify agent is active.
Given a successful installation for TPC, launch the Tivoli Integrated Portal (TIP) Console so that single sign-on (SSO) of the TPC GUI is verified.
With emphasis on performing the following tasks:
Click the TPC link in the TIP console.
Click the TPCR link in the TIP console.
Verify SSO works for TPC.
Verify SSO works for TPCR.
Given a large scale deployment for TPC and the customer’s reporting requirements, deploy secondary TPC Servers and configure server rollup so that asset information can be probed and collected from secondary servers.
With emphasis on performing the following tasks:
Deploy or identify secondary TPC Servers in the customer’s environment.
Identify correct listening ports for the secondary servers.
Based on the customers reporting needs, determine a master TPC Server for data rollup and all data source TPC Server.
Obtain user IDs needed to register secondary servers.
Add secondary severs as data sources.
Probe secondary TPC Servers.
Verify data can be collected from all TPC Servers.
Display reporting categories based on available roll-up reports.
Given an installed TPC environment and the customer’s reporting requirements, deploy the required types of TPC agents so that the appropriate agents are available and the customer’s reporting requirements are met.
With emphasis on performing the following tasks:
Determine if Agent Manager is required for the agents to be installed.
Determine if Storage Resource agents can be used instead of the TPC for Data agents.
Determine if TPC for Fabric agents are required at all.
Deploy the required agents.
from the TPC GUI
from the target machine
rxa
daemon
Section 3 – Configuration
Given the customer operating system user account groups, map the IBM Tivoli Storage Productivity Center (Tivoli Storage Productivity Center) roles to local or domain user account groups so that role-based management can be created.
With emphasis on performing the following tasks:
Create user account groups for mapping if not already created.
Map roles to user account groups.
Demonstrate user login and functionality.
Given an installed Tivoli Storage Productivity Center system, install CIM/OM and validate that it is operational, and define it to the Tivoli Storage Productivity Center server so that storage area network (SAN) storage devices can be discovered and managed as needed.
With emphasis on performing the following tasks:
Verify that the supported CIM/OM for the operating system is available.
Install and verify CIM/OM operation.
Identify CIM/OM login.
Configure CIM/OM to Tivoli Storage Productivity Center server.
Run the discovery.
Verify the devices are visible.
Probe the devices.
Verify successful data collection.
Set up CIM/OM for performance monitoring.
Given the IP Address or host name of the NAS, Netware, or Virtual Center device or other Tivoli Storage Productivity Center server, create any definitions and scan or probe agent assignment so that Tivoli Storage Productivity Center can report on the data source.
With emphasis on performing the following tasks:
Manually enter the server information and SNMP community name.
Assign a scan/probe agent.
Manually enter the host name or IP address of the Netware Server and the login information.
Create the Data Source definition for the Virtual Center.
Perform discovery and/or manual assignments of NAS, Netware.
For other NAS, verify SNMP enterprise OID vendor number exists in NAS, configure file.
Run discovery job to discover NDS/edirectory trees and NAS.
Configure NDS login for desired NDS tree.
Assign agents to scan/probe each file system “scan probe agent admin”.
Run a discovery job.
Given a customer requirement for alert routing, configure the alerts to go to the appropriate SNMP manager or Tivoli Enterprise Console or OMNIbus, so that alert notification is configured for Tivoli Storage Productivity Center.
With emphasis on performing the following tasks:
Configure SNMP parameters.
Configure Tivoli Enterprise Console or OMNIbus parameters.
Given a successfully installed Tivoli Storage Productivity Center server, Data agent, Fabric agent, CIM agent, and properly configured SNMP community names, run a discovery so that storage devices can be discovered.
With emphasis on performing the following tasks:
Run CIM/OM discovery.
Run out-of-band Fabric discovery.
Run Netware Filer discovery.
Run Windows Domain, NAS, SAN FS, and VMWare discovery.
Given an installed TPC system, configure and run a probe to collect a successful agent inventory and perform knowledge transfer to customer so that the customer understands the concepts.
With emphasis on performing the following tasks:
Log in to TPC and demonstrate the product functionality.
Select the agents (computers) to be probed, when to probe, Triggered Condition/Alert Action.
Define groups.
Define profiles.
Run a probe.
Generate an asset report.
Perform knowledge transfer to customer.
Verify customer understanding of concepts.
Given a successful agent probe, run a scan against the inventory and gather file system level information and perform knowledge transfer to customer so that the customer understands the concepts.
With emphasis on performing the following tasks:
Log in to TPC and demonstrate the product functionality.
Select computers or file systems to be scanned.
Select the Profile(s).
Choose When to Scan.
Choose Triggered Condition/Action.
Run a scan.
Perform knowledge transfer to customer.
Verify customer understanding of concepts.
Given a computer configured as a TPC agent with a supported RDBMS installed, successfully configure and collect statistics on the given database so that RDBMS data can be collected and reported on.
With emphasis on performing the following tasks:
Choose the host name and database type, entering the relevant database information.
Create and run a database probe job.
Create and run a database scan job.
Select the appropriate agent and enable Tivoli Storage Productivity Center for databases for that agent.
Define RDBMS login for appropriate database and agent.
Define database groups.
Define alerting.
Define and run probe.
Define profiles.
Define a quota.
Run a scan.
Generate reports.
Section 4 – Customization and Administration
Given customer requirements for alerting, configure an alert so that IBM Tivoli Storage Productivity Center (Tivoli Storage Productivity Center) for Data can send alerts where needed.
With emphasis on performing the following tasks:
Select computers or file systems to be scanned.
Define trigger condition.
Define trigger action (TEC, SNMP, Login Notification, Event Logs, E-mail, Scripts).
Configure parameters for selected trigger action. (for example, load Tivoli Enterprise Console TEC_ baroc file for event file; configure SNMP parameters, SNMP communicator, and compile MIB.)
Run a scan.
Verify customer understanding of concepts.
Given a functioning Tivoli Storage Productivity Center environment and a configured storage subsystem or storage area network (SAN) switch, create a performance monitor and alert so that performance monitoring and alerting functionality can be demonstrated
With emphasis on performing the following tasks:
Check the configuration utility and verify that the subsystem and switches are enabled for performance.
Create a performance monitor.
Create a performance alert and set thresholds.
Create a performance report.
Given a working Tivoli Storage Productivity Center environment and customer requirements, create profiles so that specific reports can be generated
With emphasis on performing the following tasks:
Create profiles.
Assign the profile in a scan job.
Select computers, file systems, or directories to be scanned.
Select the Profile(s).
Choose When to Scan.
Choose Triggered Condition/Action.
Run a scan.
Create a report.
Given a working Tivoli Storage Productivity Center environment and customer requirements, set history retention so that the customer’s requirements are met.
With emphasis on performing the following tasks:
Understand which information can be found on the history retention panel.
Set history retention periods.
Given a working Tivoli Storage Productivity Center environment and group membership requirements, create monitoring groups so that jobs can be run.
With emphasis on performing the following tasks:
Create computer groups.
Create file system groups.
Create directory groups.
Create user groups.
Create OS user groups.
Assign resources to groups.
Given a working Tivoli Storage Productivity Center environment and customer requirements, create custom policies so that customer’s business requirements are met.
With emphasis on performing the following tasks:
Set quotas.
Schedule data collection activities.
Configure alert constraints.
Given a working Tivoli Storage Productivity Center environment and customer requirements, perform backups so that customer backup requirements are met.
With emphasis on performing the following tasks:
Identify the database name for Agent Manager and TPC for backup purposes.
Back up Agent Manager.
Back up Tivoli Storage Productivity Center repositories.
Back up configuration files.
Back up certification files.
Given a successful Tivoli Storage Productivity Center server installation, set up a batch report for violating constraints for file types and enable HTML output for Web site reporting so that the report is displayed on the Web server.
With emphasis on performing the following tasks:
Define and run a probe.
Create a constraint for file types.
Create a profile.
Run scan with “file types” profile.
Create batch report (Select Computers, When to run, Triggered Condition/Alert).
Create HTML batch reports for Web sites.
Verify the TPC for Data agent is installed on the Web server.
Verify that the Web server can display the output of the batch report.
Given a functioning Tivoli Storage Productivity Center environment and configured SAN fabric switches, create a zone and zone set, so that Tivoli Storage Productivity Center zone management functionality can be demonstrated.
With emphasis on performing the following tasks:
Check the configuration utility and verify that the switch is enabled for zoning.
Create a zone set.
Create a zone.
Activate the zone set.
Given a functioning Tivoli Storage Productivity Center environment and configured SAN fabric switches, HBAs, and disk subsystems, use the Tivoli Storage Productivity Center analytics tools and problem determination assistance so that recommendations can be made on how to configure changes to the storage environment.
With emphasis on performing the following tasks:
Set up a configuration analysis job to analyze SAN attached resources.
Specify the storage subsystems, computers, and the fabric to have the planner provide appropriate storage recommendation.
Given a functioning Tivoli Storage Productivity Center environment and configured SAN fabric switches, HBAs, and disk subsystems, use the topology display so that configuration planning and analysis can be performed.
With emphasis on performing the following tasks:
Use data path explorer to generate an end-to-end storage topology view.
Adjust the topology settings to display performance overlays.
Launch the planner to configure storage and zoning.
Determine alerts associated with a specific device.
Launch reports from the topology viewer for the data and disk manager.
Launch the element manager to manage a specific device.
Use the pin function to highlight a specific device in applicable view.
Section 5 – Troubleshooting
Given a malfunctioning IBM Tivoli Storage Productivity Center environment and a serviceability tool output request from IBM support, generate the serviceability report files so that they can be used for troubleshooting.
With emphasis on performing the following tasks:
Check the services.
Locate log file directories and log files.
Look in the alert log of TPC.
Run the serviceability tool.
Collect the server logs.
Collect the common agent logs.
Number of questions: 66
Time allowed in minutes: 75
Required passing score: 59%
Test languages: English
1. For computer and file system groups in Data Manager, a Group By Cluster check box is displayed.
What happens if this option is selected?
A. The Available pane displays a cluster name next to any clustered computers and cluster resource
groups.
B. The Available pane automatically filters and hides any cluster aware computers from being displayed in
the list.
C. The Available pane provides an additional option of being able to filter and hide cluster aware computers
from being displayed in the list.
D. The Available pane displaying any computer or cluster resource group that belongs to a PowerHA or
MSCS Cluster is grouped under its cluster
name.
Answer: D
2. What are two prerequisites for IBM Tivoli Storage Productivity Center to launch external tools? (Choose
two.)
A. It can be launched with a URL.
B. It is a locally installed application.
C. It must support Web 2.0 standard.
D. It is a platform independent Java application.
E. It runs in the same WebSphere server that the data server runs in.
Answer: AB
3. What is the minimum number of servers required to install DB2, IBM Tivoli Agent Manager and IBM
Tivoli Storage Productivity Center for a small customer environment consisting of a single DS8000 and 10
host machines?
A. 1
B. 2
C. 3
D. 4
Answer: A
4. How many zone member(s) does a zone contain?
A. one
B. five
C. unlimited
D. Check with vendor documentation to see what is supported.
Answer: D
5. Which IBM Tivoli Storage Productivity Center license is necessary for IBM Tivoli Storage Productivity
Center –> Analytics function usage?
A. IBM Tivoli Storage Productivity Center for Data
B. IBM Tivoli Storage Productivity Center Basic Edition
C. IBM Tivoli Storage Productivity Center Limited Edition
D. IBM Tivoli Storage Productivity Center Standard Edition
Answer: D
6. Which IBM Tivoli Storage Productivity Center V4.1 media disk image contains the Storage Resource
agent installation packages?
A. Disk 1
B. Disk 2
C. Disk 3
D. both Disk 1 and Disk 2
Answer: D
7. Upon completion of the IBM Tivoli Storage Productivity Center (Tivoli Storage Productivity Center)
upgrade, the Tivoli Storage Productivity Center database must be migrated by using the database
migration tool. Which choice represents the database migration tools that can be executed to perform the
database migration?
A. db2update.bat or db2update.sh
B. migratetables.bat or migratetables.sh
C. partitiontables.bat or partitiontables.sh
D. migratepartitions.bat or migratepartitions.sh
Answer: C
8. Which jobs need to run in order to populate the database with all available information for a storage
subsystem?
A. Probe and Scan
B. Discovery and Scan
C. Discovery and Probe
D. Probe and Performance Monitor
Answer: C
9. Which is a valid triggering condition for the scan job alert?
A. Scan Failed
B. Scan Completed Successfully
C. Scan Completed with Warnings
D. Scan found more than 10,000 files
Answer: A
10. Which task must be performed before gathering information about NetWare volumes?
A. Create profiles to define which Netware servers to scan.
B. Create quotes to control how many NetWare volumes should be pinged and scanned.
C. Configure Device Manager to discover all the NetWare servers in NDS trees and then run a ping job.
D. Define a scan and include the NetWare volumes and file systems for which you want to gather detailed
storage information.
Answer: D
Free Testking HP0-S21 BladeSystem Exam Braindump
Free Testking HP0-S21 BladeSystem Exam Braindump, HP0-S21 Exam Integrating and Managing HP BladeSystem in the Enterprise. Course 00115751: Integrating and Managing HP BladeSystem in the Enterprise Rev. 9.31
Delivery Format: ILT
Typical Duration: 40 hours
ASE – HP BladeSystem [2009] replaces ASE – HP BladeSystem [2007], which cannot be acquired after 1 February 2010. The [2009] candidate who already holds the [2007] certification can take the exam HP0-S21 in order to update his or her certification.
1. What do you need to consider when installing mezzanine cards in an HP ProLiant BL685c G6 Server
Blade? (Select two.)
A. Type 2 mezzanine cards can be installed in slots 2 and/or 3 if they match the interconnect module type.
B. Type 2 mezzanine cards can be installed in any slot if they match the interconnect module type.
C. Type 2 mezzanine cards need to be installed in slot 1 and match the interconnect module type.
D. Type 1 mezzanine cards can be installed in any slot if they match the interconnect module type.
Answer: AD
2. You are troubleshooting a performance issue on a BL460c Server Blade with a Linux operating system
installed. Which command should you use to get comprehensive memory information?
A. iostat
B. glance
C. free
D. memdiag
Answer: C
3. Which HP Insight Control Suite software provides centralized capture, monitor, report, and control of HP
BladeSystem power consumption and thermal output?
A. HP ProLiant Insight Power Regulator
B. HP ProLiant Onboard Administrator
C. HP Insight Power Manager
D. HP Insight Diagnostics Online Edition
Answer: C
4. Which industry standard management protocols are used by HP SIM? (Select two.)
A. SSH
B. SNMP
C. DMI
D. XML
E. SMTP
Answer: BC
5.Which industry standard memory technologies can be used by Intel Xeon-based c-Class server blades to
provide additional protection against failed or degrading FB-DIMMs? (Select two.)
A. chip spare
B. mirrored memory
C. parity memory
D. online spare memory
Answer: BD
6. Microsoft Cluster Server is an example of which type of clustering architecture?
A. shared-memory
B. High-Performance Computing
C. shared-everything
D. shared-nothing
Answer: D
7. Which memory slots must be populated first in a ProLiant BL490c G6?
A. blue
B. white
C. black
D. brown
Answer: B
8. Which feature is used in conjunction with the Trusted Platform Module (TPM)?
A. OpenSSH
B. LDAP
C. BitLocker
D. HP SIM
Answer: C
9. Which logical extension of the HP Insight Dynamics – VSE Suite provides failure protection for logical
servers?
A. Insight Orchestration
B. Insight Rapid Deployment
C. Insight Systems Manager
D. Insight Recovery Software
Answer: D
10.What is the maximum number of Cisco 3120 Switches that can be combined into a single logical stack?
A. 4
B. 6
C. 8
D. 9
E. 12
Answer: D
Free Testking 642-357 CCNP DCSNS Exam Braindump
Free Testking 642-357 CCNP DCSNS Exam Braindump, 642-357 Designing Cisco Storage Network Solutions. Candidates can prepare for this exam by taking the Designing Cisco Storage Network (DCSN) course. This exam tests a candidate’s knowledge of selecting and integrating Cisco storage products to design a highly scalable, efficient, high performing storage networking solution based on converged architecture. Cisco Storage Networking Design Specialist professionals understand how to utilize and employ the features and benefits of the Cisco MDS 9000 Series Multilayer Directors and Switches, Cisco MDS 9509 Director Switch, Cisco 9216 Fabric Switch, and Cisco MDS 9120 products to create a high availability storage network design.
The following topics are general guidelines for the content likely to be included on the Remote Access exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.
Perform a needs analysis that identifies the appropriate Storage Networking topology, protocols, and transport to meet customer’s requirements
Identify the interoperability requirements of a customer’s SAN
Design a solution that addresses a customer’s SAN requirements
Design appropriate IP configurations for a SAN solution1. Which three Fibre Channel switch features are unique to Cisco’s MDS 9000 Series switches? (Choose
three.)
Select 3 response(s).
A. LUN Zoning
B. Read-Only Zones
C. Internet-Switch Link
D. Fibre Channel Congestion Control
E. FC Link Aggregation
F. FSPF
Answer: ABD
2. Which Cisco MDS 9500 Series feature addresses the customer requirement for five nines
(99.999-percent) availability?
Select the best response.
A. active and standby FC line cards
B. virtual output queuing (VOQ)
C. SSM card is installed in the switch
D. nondisruptive software upgrades
E. redundant fan cards
Answer: D
3. Which statement is true concerning the Cisco MDS switch when operating in native interop mode?
Select the best response.
A. The MDS switch can interoperate with Non-MDS switches that are certified by SNIA.
B. The MDS switch can interoperate with Non-MDS switches that support “MDS Native” mode.
C. The MDS switch can interoperate with Non-MDS switches that properly adhere to Fibre Channel switch
standards.
D. The MDS switch cannot interoperate with Non-MDS switches.
Answer: C
4. Which are two characteristics of the Cisco MDS Series fan modules? (Choose two.)
Select 2 response(s).
A. Supervisor modules shut down the fan modules when the air temperature is below a preset threshold.
B. If the Fan Status LED turns red, a fan has failed and the module must be replaced.
C. Fan modules monitor air temperature and shut down if the temperature exceeds a preset threshold.
D. Fan modules do not require the switch to be powered off in order to be replaced.
Answer: BD
5. Your customer has implemented an IPS-8 for FCIP connectivity to remote sites. How can this customer
prevent unauthorized hosts from connecting to the Cisco MDS 9000 fabric through the FCIP interfaces?
Select the best response.
A. Configure RADIUS authentication
B. Configure IPSec encryption on the IPS-8
C. Configure IP ACLs on the IPS-8
D. Configure fabric binding on the IPS-8
Answer: C
6. What are two ways of preventing unauthorized hosts from connecting to the management interface of a
Cisco MDS 9000 Family switch? (Choose two.)
Select 2 response(s).
A. use SNMPv3 only
B. configure IP ACLs
C. configure management VSANs
D. use digital certificates
E. implement RBAC
Answer: BD
7. Your customer has implemented an IPS-8 for iSCSI connectivity to workgroup servers. How can this
customer prevent unauthorized hosts from connecting to the Cisco MDS 9000 fabric through the iSCSI
interfaces?
Select the best response.
A. Configure RADIUS authentication
B. Configure IPSec encryption on the IPS-8
C. Configure IP ACLs on the IPS-8
D. Configure fabric binding on the IPS-8
Answer: C
8. What is the principal cost advantage of a collapsed core SAN design compared to a core-edge design if
each connects the same number of host and storage ports?
Select the best response.
A. fewer hops for a given exchange
B. fewer long-wave SFPs
C. fewer ISL connections
D. fewer domains on the domain list
E. fewer director-class switches
Answer: C
9. What is the best mechanism to use to isolate backup traffic from other mission-critical traffic?
Select the best response.
A. VSANs
B. zones
C. QoS
D. IVR
Answer: A
10. Which of these provides fabric-based virtualization for multiple independent software vendors?
Select the best response.
A. Storage Services Module (SSM)
B. Cisco MDS 9000 32-port 1/2-Gbps Fibre Channel module
C. Multiprotocol Services module
D. Cisco MDS 9513 Supervisor 2
Answer: A
Free Testking HP0-S16 BladeSystem Exam Braindump
Free Testking HP0-S16 BladeSystem Exam Braindump, Implementing HP BladeSystem HP0-S16. The intent of this guide is to set expectations about the content and the context of the exam and to help candidates prepare for it. Recommended training to prepare for this exam can be found on the certification requirements page on the HP Certified Professional Program web site. This guide may contain supplementary references relevant to the topics covered by the exam.
The following are details about the exam:
Number of items: 63
Item types: multiple choice, drag and drop, graphical
Exam Time: 90 minutes
Passing Score: 75%
Reference Material: No on-line or hard copy reference material will be allowed at the testing site.
1.0
Industry standard server technologies and solutions (8%) Describe processor technologies Describe memory technologies Describe system architecture Describe storage technologies Describe network technologies Identify and describe blade technology concepts Describe server functionality Describe Server Hardware Management Technologies Describe data center components design
2.0
HP industry standard server products and solutions (13%) Identify and describe server products Describe health and fault management tools and technologies Identify and describe Remote Management offerings Identify and describe rack solutions (including options) Identify and describe protection and power management Identify and describe network options Identify and describe storage options Identify and describe standard HP management solutions for Windows/Linux of x86 and/or IA64 Identify and describe HP ProLiant Essentials Identify and describe HP SIM management
3.0
Planning and designing a deployable solution (12%) Gather customer business requirements and existing infrastructure data
Consider factors that may affect the solution implementation Determine if the new solution is deployable using the existing resources. Design, size and validate the solution Write a scope of work
4.0
Install, configure and upgrade BladeSystem solutions (22%) Verify and check the physical installation/setup diagram/specification based on the customer/presales design Install the rack and its accessories Install and configure server hardware and related options Install and assemble external storage Configure server hardware and related options Install HP supported operating system Install and configure management software Install and configure BladeSystem Validate, test, and document the solution
6.0
Troubleshooting and repair/replacement procedures (13%) Describe HP troubleshooting methodology- 6 step process Gather information Evaluate data to determine problem Develop an action plan Execute the action plan Test if fault has been resolved using appropriate tools Implement preventive measures by taking necessary steps to insure the problem does not reoccur Troubleshoot and repair BladeSystem specific components
7.0
HP Unified Infrastructure Management (15%) Use HP SIM Use HP BladeSystem Management Use ProLiant Essentials
4
Use Integrity Essentials Use Storage Essentials Use Server Services
8.0
Administrative and operational tasks (10%) Perform system upgrades Determine and implement the appropriate back-up solutions
9.0
HP Service Offerings (7%) Identify and describe HP Standard Warranties Identify and describe HP Care Packs Identify and describe additional service offerings
1. What is the minimum number of power supplies required in a BladeSystem c-Class when using threephase
power?
A. 2
B. 3
C. 6
D. 8
Answer: C
2. What is the standard HP warranty on optional components such as mezzanines, fans, and power
supplies?
A. 1-1-1 (1 year parts; 1 year labor; 1 year onsite limited global warranty)
B. 3-3-3 (3 year parts; 3 year labor; 3 year onsite limited global warranty)
C. 1-0-0 (1 year parts limited global warranty or the system warranty, whichever is longer)
D. 1-1-0 (1 year parts limited global warranty or the system warranty, whichever is longer; 1 year labor)
Answer: C
3. Which processors use a 64-bit x86-based architecture? (Select two.)
A. Intel Itanium
B. AMD Opteron
C. Intel Pentium IV
D. Intel Pentium M
E. Intel Xeon Quad Core
Answer: BE
4. Which HP BladeSystem c-Class server blades support HP-UX? (Select two.)
A. BL465c
B. BL680c
C. BL685c
D. BL860c
E. BL870c
F. BL2×220c
Answer: DE
5. What is the function of ECC memory?
A. It only detects single-bit errors.
B. It detects and corrects single-bit errors.
C. It detects multi-bit errors within a single DRAM chip.
D. It detects and corrects multi-bit errors within a single DRAM chip.
Answer: B
6. Which storage technology is used with Serial Attached SCSI?
A. NUMA
B. shared bus
C. one-to-many
D. point-to-point
Answer: D
7. Which options exist when you enable HP NIC teaming? (Select two.)
A. fault tolerance
B. CISCO Layer 4 teaming
C. socket layered balancing
D. NIC assisted load balancing
E. switch assisted load balancing
Answer:AE
8. Which HP server blade uses the Itanium processor?
A. SB40c
B. BL485c
C. BL685c
D. BL860c
E. BL2×220c
Answer: D
9. How is BladeSystem Integrated Manager installed by default?
A. as part of a SmartStart installation
B. with the initial installation of HP SIM
C. as an add-on after HP SIM is installed
D. with a separate license key in HP SIM
Answer: B
10. Which Onboard Administrator is the primary by default?
A. the left one
B. the right one
C. the active one
D. the first one installed
Answer:A
Which HP offering provides individual services such as image loading, asset tagging and custom
packaging for customers?
A.Factory Express
B.HP Support Plus
C.HP Support Services
D.HP Care Pack Services
Answer: A
Which processor uses 64-bit x86-based standard architecture and Hyper-Transport technology?
A.AMD Athlon
B.Intel Itanium2
C.AMD Opteron
D.Intel Xeon 7000 Sequence
Answer: C
What causes a system to perform an ASR (Automated System Recovery)?
A.A hardware failure occurs on a redundant hardware option.
B.A hardware failure occurs on a non-redundant hardware option.
C.The ASR timer expires due to the operating system not responding.
D.The ASR monitor determines that the operating system wrote to a bad memory location.
Answer: C
Which memory protection technology protects against multiple, non-correctable multi-bit errors with no
performance degradation?
A.RAID memory
B.Online spare memory
C.Advanced ECC memory
D.Single-board mirrored memory
Answer: D
What are advantages of using point-to-point storage technology with Serial Attached SCSI (SAS)?
(Select two.)
A.greater disk capacity
B.increased bandwidth
C.higher fault tolerance of the disks
D.better isolation of hard drive failures
Answer: BD
Which options are available when you enable HP NIC teaming? (Select two.)
A.fault tolerance
B.shortest path routing
C.physical stack balancing
D.NIC assisted load balancing
E.switch assisted load balancing
Answer: AE
Which c-Class server blades support Fully Buffered-DIMM Memory? (Select two.)
A.BL460c
B.BL465c
C.BL480c
D.BL685c
E.BL860c
Answer: AC
Which server management products are part of ProLiant Essentials? (Select three.)
A.Insight Power Manager
B.Rapid Deployment Pack
C.Instant Support Enterprise Edition
D.StorageWorks Management Pack
E.Virtual Machine Management Pack
Answer: ABE
Free Testking HP0-A01 HP-UX 11i v3 System Administration Exam Braindump
Free Testking HP0-A01 HP-UX 11i v3 System Administration Exam Braindump, HP0-A01 HP-UX 11i v3 System Administration.
The intent of this guide is to set expectations about the content and the context of the exam and to help candidates prepare for the exam. In this guide, you will find recommended HP training courses, reference and study material to help you achieve a successful passing score. Studies conducted by HP and Prometric show that a combination of course attendance and self-study maximizes the likelihood of passing the exam on the first attempt.
The HP-UX 11i v3 System Administration Exam #HP0-A01 is the core requirement to be certified as a Certified Systems Administrator (CSA). Visit the HP Certified Professional website for additional information, www.hp.com/go/certification.
At the beginning of the exam, you will be asked to answer several survey questions. The survey questions are designed to assist the exam development team in accurately profiling test results and to improve future exams.
The following are details about the exam:
n Number of items: 60
n Item types: multiple choice, drag and drop, graphical
n Exam time: 90 minutes
n Passing Score: 70%
n Reference Material: No on-line or hard copy reference material will be
allowed at the testing site.
1.0 HP-UX Architecture and Structure (17%)
Describe the HP-UX OS architecture
Describe the HP-UX processor families
Describe the major hardware components found in HP’s
current systems
Describe the features and benefits of HP disk
management solutions
Describe the significance of basic LVM concepts and
structure
Describe virtualization technologies and concepts
Describe the concept and benefits of the Mass Storage Stack
Describe 11i v3 performance and capacity improvements and
workload benefits
2.0 HP-UX user environment, basic commands, and utilities (15%)
Login and logout of an HP-UX system
Determine basic information about a system
Execute HP-UX commands from the command line
Manage and manipulate files and directories
Define and describe the attributes of basic system
components
Demonstrate the tools and techniques used to identify,
monitor, and terminate programs and processes
Identify and explain how and when to use advanced
shell features
Describe and demonstrate how to communicate with
system users
Describe when and how to access basic network services
3.0 HP-UX system administration and operational tasks (26%)
Boot, reboot and shutdown an HP-UX system or partition
Connect and configure HP-UX hardware
Describe, configure, and manage HP-UX device files
Configure and manage disks and partitions
Maintain file and file system integrity and design
Backup and recover data on an HP-UX system
Create and manage swap space
Create and manage User/Group environments
Configure and reconfigure the HP-UX kernel
Describe common areas of performance bottlenecks
Describe SYS-V IPC services and their use
Describe SAM and its use
Describe System Startup model and its use
Describe /etc/default and its use
Monitor system activity and events
Implement HP partitioning solutions
Describe Web-Based Enterprise Management (WBEM) and its
use
Describe HP Systems Insight Manager (HP SIM) and its use
Describe System Management Homepage (SMH) and its use
4.0 HP-UX system network administration tasks (23%)
Describe MAC addressing and its use
Describe IP addressing and its use
Enable DHCP for NIC address configuration
Check local connectivity to a known neighbor by IP or by
Mac (station or Ether) address
Describe set_parms and its use
Describe common network configuration files and their use
Describe network monitor utilities and their use
Configure and monitor network services
Describe the HP CIFS Product Suite and its use
Describe the ONC suite of network services and their use
Describe LDAP and its use
Describe DNS and its use
Describe sendmail and its use as a MTA and MDA
Describe NTP and its use
5.0 HP-UX installation, upgrade, and recovery tasks (6%)
Perform an HP-UX installation from local installation media
Perform an HP-UX installation from an SD-UX server
Install HP-UX patches
Describe the features and benefits of Ignite-UX
6.0 HP-UX security administration tasks (11%)
Cite ‘users level’ security settings
Describe how to implement system access restrictions
Describe common system security concerns
1. What is IP multiplexing on a UNIX host?
A. increasing throughput on the network interface
B. binding the same IP address to multiple network interface
C. binding more than one IP address to a single network interface
D. binding more than one MAC address to a single network interface
Answer: C
2. How can you enable only NFS version 4 support on HP-UX 11i v3?
A. HP-UX v3 does not support NFSv4.
B. Change the NFSv4 kernel parameter to yes, recompile the kernel and reboot.
C. Using only NFSv4 is not supported; NFSv2 and NFSv3 are always enabled.
D. Set the configuration parameters NFS_SERVER_VERSMIN and NFS_SERVER_VERSMAX to 4.
Answer: D
3. Which commands can confirm host name resolution (DNS/Bind) is working correctly?
A. whois
B. uname
C. nsquery
D. hostname
E. gethostbyname
Answer: C
4. Which NFS server file contains a list of clients that currently have the server’s NFS file systems mounted?
A. /etc/fstab
B. /etc/rmtab
C. /etc/nfstab
D. /etc/mnttab
E. /etc/exports
Answer: B
5. What does the linkloop command test?
A. router activity
B. Maximum Transmission Unit (MTU) size
C. MAC address connectivity between network cards
D. loopback address connectivity between network cards
Answer: C
6. What is the length of an IPv4 address?
A. 32 bits
B. 48 bits
C. 64 bits
D. 128 bits
Answer: A
7. Which tools have been deprecated with the introduction of the nwmgr command? (Select three.)
A. netstat
B. ifconfig
C. linkloop
D. lanscan
E. lanadmin
Answer: CDE
8. Which file contains the information sent in response to a bootp request?
A. /etc/services
B. /etc/bootptab
C. /etc/inetd.conf
D. /etc/bootp.conf
Answer: B
Free Testking HP2-T14 ProLiant ML/DL Servers Rev 8.31 Exam Braindump
Free Testking HP2-T14 ProLiant ML/DL Servers Rev 8.31 Exam Braindump, Servicing HP ProLiant ML/DL Servers HP2-T14 exam.
The intent of this guide is to set expectations about the content and the context of the exam and to help candidates prepare for it. Recommended training to prepare for this exam can be found at The Learning Center. This guide may contain supplementary references relevant to the topics covered by the exam.
This exam is for system engineers or technicians who require in-depth understanding of the technologies deployed in HP ProLiant ML/DL in the enterprise and computer professionals pursuing an HP Accredited Platform Specialist (APS) certification. Examples of job roles include:
HP Authorized Service Partner Systems Engineer
HP Solution Architect
HP Technical Client Consultant
The following are details about the exam:
Number of items: 60
Item types: multiple choice, drag-and-drop, hot area
Exam Time: 90 minutes
Passing Score: 75%
The following testing objectives represent the specific areas of content covered in the exam. Use this outline to guide your study and to check your readiness for the exam. The exam measures your understanding of these areas.
Section Industry standard server technologies and solutions (10%)
Describe processor technologies
Describe memory technologies
Describe system architecture
Describe storage technologies
Explain network technologies
Describe high Availability and Performance Clustering
Technologies
Identify and describe the OS, virtualization, and clustering
ISV solutions currently supported by HP
Describe OS architectures
Describe Server Hardware Management Technologies
Section HP industry standard server products and solutions (18%)
Identify and describe server products
Describe health and fault management tools and
technologies
Identify and describe remote management offerings
Identify and describe rack solutions (including options)
Identify and describe network options
Identify and describe HP storage options
Identify and describe HP ProLiant Essentials
Identify and describe HP SIM management
Section Install, configure and upgrade ProLiant servers and options (25%)
Verify and check the physical installation/setup
diagram/specification based on the customer/presales
design
Install the rack and its accessories
Install and configure server hardware and related options
Install and assemble HP external storage
Configure server hardware and related options
Section Troubleshooting and repair/replacement procedures (24%)
Describe HP troubleshooting methodology- 6 step process
Gather information
Evaluate data to determine problem
Develop an action plan
Execute an action plan
Test if fault has been resolved using appropriate tools
Implement preventive measures by taking necessary steps to
insure the problem does not reoccur
Section HP Unified Infrastructure Management (7%)
Use ProLiant Essentials
Section ProLiant administrative and operational tasks (9%)
Perform system upgrades
Section HP Service Offerings (6%)
Identify and describe HP Standard Warranties
Identify and describe HP Care Packs
Identify and describe additional service offerings
1. Which statement is true regarding HP ProLiant servers?
A. HP ProLiant servers have three system ROMs for redundancy.
B. SmartStart CD 7.x can be used to run the HP ROM Update Utility.
C. Hard drive firmware can only be updated in offline mode.
D. HP ProLiant Firmware Maintenance CD can be used to upgrade firmware in offline mode.
Answer: C
2. Which statement is true about processor installation?
A. Processors of different speeds can be mixed as long as they are of the same type.
B. Locking levers should be used only when the Intel Xeon processor series is installed.
C. Intel and AMD processors can be mixed in the same server.
D. Any associated memory installation must be completed correctly for Opteron servers.
Answer: D
3. A customer has a ProLiant ML350 G5 with a Smart Array P400/256MB Controller. They have four SAS
drives configured into Array A and created a LUN using RAID 1+0. With the remaining space the customer
wants to create a LUN using RAID ADG, but the option is not available using the online ACU.
What must the customer do to make the option available?
A. upgrade to a P800 Controller, as P400 does not support RAID ADG
B. install the Battery-Backed Write Cache (BBWC) option to P400
C. use offline ACU, as online ACU does not support RAID ADG
D. use ORCA to configure RAID ADG
Answer: B
4. You have a 100GB logical volume carved out of your Smart Array, presented to Windows, and mounted
as a single partition with a single filesystem. You need more space in that filesystem, and you expand the
logical volume to 200GB. However, the filesystem still only shows 100GB, and an examination of the disk
resource shows a 100GB partition with 100GB of unused space.
Which utility can you use within Windows to expand a partition and filesystem to use the remaining
contiguous space on a logical volume?
A. ORCA
B. ACU
C. Disk Manager
D. Diskpart
Answer: D
5. During a boot cycle, how do you access the iLO 2 configuration so that you can change the admin
password for iLO?
A. by pressing F1 to access the iLO configuration menu
B. by pressing F8 to access the iLO configuration menu
C. by pressing F9 to access the RBSU configuration menu
D. by pressing F1 to access the RBSU configuration menu
Answer: B
Free Testking HP0-J33 HP MASE StorageWorks EVA Exam Braindump
Free Testking HP0-J33 HP MASE StorageWorks EVA Exam Braindump, HP0-J33 Exam Implementing HP StorageWorks EVA Solutions.Exam Number/Code : HP0-J33
Exam Name : Implementing HP StorageWorks EVA Solutions
Questions and Answers : 70 Q&As
Which statement is correct about virtual disk presentation for an EVA?
A. Multiple hosts can be assigned to a Vdisk after creation.
B. Vdisk folders can be associated with a host at creation time.
C. When creating a Vdisk, it can be presented to multiple hosts.
D. Host presentation must be set after Vdisk creation is completed.
Answer: A
1. Which feature is unique to the EVA8400 / 11GB cache (per controller) model when compared to other
EVA array models?
A. use of a third cache battery
B. 400TB addressable storage space
C. up to 5GB policy memory
D. maximum of 27 device shelves
Answer: A
2. Which EVA virtualization features help reduce customer Total Cost of Ownership? (Select two.)
A. load customization
B. LUN definition ruleset
C. pre-set VRAID security
D. reduced stranded capacity
E. significantly increased utilization
Answer: DE
3. What is the source of the identifying data that is inserted into the HP CommandView EVA SNMP MIB
when it is generated?
A. SMI-S agent on management host
B. hardware ASIC in the first host port that sends the event
C. default parse file
D. controller software-specific parse file
Answer: D
4. A disk group is set to double protection level and contains only Vraid1 virtual disks. What happens when
there is simultaneous loss of two physical disks from different mirrored pairs within the same Redundant
Storage Set?
A. The Vraid1 fails and there is data loss.
B. Vraid1 data migrate to Vraid5.
C. The Vraid1 virtual disk stays in degraded mode and data is preserved.
D. The Vraid1 data from the failed disks is reconstructed.
Answer: D
5.What happens when you set the failure protection level for a disk group with same-sized disks on an EVA
to single?
A. Two disks are reserved as spare space.
B. A one-disk equivalent is reserved as spare space.
C. One disk is reserved as spare space.
D. A two-disk equivalent is reserved as spare space.
Answer: D
6. What is a physical segment (PSEG) in the EVA context?
A. smallest virtual disk space allocated on a disk drive
B. smallest physical disk space allocated on a disk drive
C. disk space containing information about the selected redundancy level of the virtual disk
D. data portion read from or written to a physical disk before the next physical disk is accessed
Answer: B
7. You create a Vraid0 LUN in an EVA with 16 disks consisting of two 8-drive RSS sets. What will happen if
a single disk fails?
A. The LUN will fail even with an RSS configured.
B. The LUN will continue to operate normally due to the redundancy provided by the RSS sets.
C. The LUN cannot be configured across two RSS sets.
D. The LUN will continue to operate at reduced performance while the RSS sets rebuild the lost data.
Answer: A
8. Which interconnect technology is used when integrating the mpx110 router into an EVA solution?
A. FCIP
B. FICON
C. iSCSI
D. WDM
Answer: A
9. Which interface is used to connect a FATA drive to an EVA controller? (Select two.)
A. single port
B. dual port
C. Serial ATA
D. Native Fibre Channel
E. Parallel ATA
Answer: BD
10. How does releveling occur after the loss of one disk in a 16-member group containing ten 10GB Vraid1
Vdisks?
A. The group does not need to relevel.
B. across 16 disks in the group
C. across 15 disks in the group
D. across 14 disks in the group
E. across 10 disks in the group
Answer: D
How can you update the parse file on an EVA controller?
A. Add parse file descriptors with the SSSU editor.
B. Load a separate parse file using CommandView EVA.
C. Copy a description file to the CommandView EVA binary folder on the Management Station.
D. Update the WEBES rule set on the Management Station.
Answer: B
You are at a customer site to migrate an active/active EVA3000 storage system to an EVA4400 system.
What is the minimum firmware that must be running on the EVA3000 to support this upgrade?
A. VCS 4.007
B. VCS 4.001
C. VCS 4.004
D. VCS 4.100
Answer: D
How does the physical layout of the EVA6400 and EVA8400 differ from the EVA6100 and EVA8100?
(Select two.)
A. The Cabinet Area Network bus cables plug directly into the I/O modules.
B. A single controller enclosure houses a pair of controllers.
C. The device loop switches have been eliminated.
D. The bottom 2U of the cabinet is taken up by a pair of 1U PDUs.
E. The drive shelves are SAS instead of Fibre Channel.
Answer: CD
A customer is adding an EVA4400 to their environment which includes an HP BladeSystem and a
Virtual Library System. Which remote monitoring solution is appropriate?
A. HP Insight Remote Support
B. HP StorageWorks CommandView EVA
C. HP Systems Insight Manager
D. HP Systems Insight Manager with Remote Support Pack
Answer: D
Which Vraid level provides the lowest cost of protected storage?
A. Vraid50
B. Vraid6
C. Vraid5
D. Vraid1
Answer: C
Which service level extension is provided by an uplift to the HP Proactive 24 service?
A. 6 hour Call to Repair service
B. patch and firmware reviews
C. 24 hour service
D. predictive replacement of key hardware components
Answer: B
Which practice is recommended for an EVA solution with a mix of 10,000 rpm disks and 15,000 rpm
disks?
A. 15,000 rpm disks must be slowed to 10,000 rpm speed through the SSSU when placed in the same disk group.
B. The number of 10,000 rpm disks and 15,000 rpm disks must be equal in the array.
C. 10,000 rpm disks and 15,000 rpm disks should be placed in different disk groups that are located in
separate disk enclosures.
D. 10,000 rpm disks should be in one disk group and 15,000 rpm disks should reside in a separate disk
group.
Answer: D
Which statement is correct regarding mirrorclones?
A. The use of a container for a mirrorclone is not supported.
B. You can snapshot a mirrorclone if fractured.
C. The redundancy level must be the same or lower than the original.
D. The mirrorclone must be in a different disk group than the original.
Answer: B
Free Testking HP0-J36 HP CSE LeftHand SAN Exam Braindump
Free Testking HP0-J36 HP CSE LeftHand SAN Exam Braindump, HP0-J36 HP CSE HP Designing and Implementing HP LeftHand SAN Solutions.
HP0-J36: Designing and Implementing HP LeftHand SAN Solutions
Practice Exam: HP0-J36 Exams
Exam Number/Code: HP0-J36
Exam Name: Designing and Implementing HP LeftHand SAN Solutions
Questions and Answers: 65 Q&As
1. Which statement about volumes is correct? (Select three.)
A. Volumes can be part of different clusters.
B. Each volume belongs to a single cluster.
C. For database applications, different volumes should be used for database files and log files.
D. Volumes in the same cluster must have the same replication level.
E. Volumes can be migrated to different clusters within the same management group.
F. Additional volumes require additional storage nodes in the cluster.
Answer: BCE
2. Where is RAID configured in HP LeftHand SAN solutions?
A. at the volume level
B. at the storage node level
C. at the cluster level
D. at the management group level
Answer: B
3. Which types of host bus adapters (HBA) can be used for the iSCSI protocol? (Select two.)
A. SW iSCSI initiator without a NIC (network interface card)
B. iSCSI HBA with TCP offload engine (TOE)
C. Fibre Channel HBA
D. NIC with SW iSCSI initiator
E. iSCSI HBA with TCP TOE SW iSCSI initiator
Answer: BD
4. Which statements about iSCSI are correct? (Select two.)
A. iSCSI does not offer any security features.
B. iSCSI installation is less complex than Fibre Channel installation.
C. iSCSI is only supported by Microsoft Windows operating systems.
D. iSCSI is available for the most common OS platforms.
E. iSCSI is a parallel data protocol.
Answer: BD
5. Which statement is true about the iSCSI initiator?
A. The iSCSI initiator is only active during read operations.
B. The iSCSI initiator represents the LUNs.
C. The iSCSI initiator resides on the host and connects to the targets.
D. The iSCSI initiator is a software package running on the host.
Answer: C
6. Which statements about HP LeftHand SAN replication levels are correct? (Select three.)
A. Copies are located on different clusters.
B. Redundant copies of blocks reside on different storage nodes.
C. Performance improves as the number of copies increases.
D. Up to four copies can be created.
E. The replication level is defined per storage node.
F. The replication level cannot exceed the number of storage nodes in the cluster.
Answer: BDF
7. What are typical examples of snapshot utilization? (Select three.)
A. replacement for traditional backups
B. protection against disk failures
C. protection against multiple hardware failures
D. protection against manual data deletion
E. file level restore without tape or backup software
F. source volumes for backup creation
Answer: DEF
8. Which statements about remote copy are correct? (Select two.)
A. Remote copy is always thin provisioned.
B. Remote copy can be synchronous and asynchronous.
C. Remote copy is an asynchronous replication of a volume.
D. Remote copies cannot be mounted.
E. Remote copy is asynchronous replication between different clusters only.
Answer: AC
9. for what are IP SANs best suited? (Select three.)
A. applications requiring minimum latency
B. environments that require Fibre Channel infrastructure
C. high availability environments
D. geographic disaster recovery
E. environments with existing Ethernet infrastructure
F. non-shared storage implementation
Answer: CDE
10. Which statement about Virtual IP Load Balancing (VIPLB) is correct?
A. VIPLB is part of the Windows Solution pack.
B. VIPLB is a software driver installed on the host.
C. VIPLB replaces the iSCSI redirect function.
D. VIPLB directs iSCSI communication to the least busy storage node in the cluster.
Answer: D
1. Which statements about HP LeftHand SAN replication levels are correct? (Select three.)
A. Copies are located on different clusters.
B. Redundant copies of blocks reside on different storage nodes.
C. Performance improves as the number of copies increases.
D. Up to four copies can be created.
E. The replication level is defined per storage node.
F. The replication level cannot exceed the number of storage nodes in the cluster.
Answer: BDF
2. Which statements about iSCSI are correct? (Select two.)
A. iSCSI does not offer any security features.
B. iSCSI installation is less complex than Fibre Channel installation.
C. iSCSI is only supported by Microsoft Windows operating systems.
D. iSCSI is available for the most common OS platforms.
E. iSCSI is a parallel data protocol.
Answer: BD
3. for what are IP SANs best suited? (Select three.)
A. applications requiring minimum latency
B. environments that require Fibre Channel infrastructure
C. high availability environments
D. geographic disaster recovery
E. environments with existing Ethernet infrastructure
F. non-shared storage implementation
Answer: CDE
4. Which statement about volumes is correct? (Select three.)
A. Volumes can be part of different clusters.
B. Each volume belongs to a single cluster.
C. For database applications, different volumes should be used for database files and log files.
D. Volumes in the same cluster must have the same replication level.
E. Volumes can be migrated to different clusters within the same management group.
F. Additional volumes require additional storage nodes in the cluster.
Answer: BCE
5. Which types of host bus adapters (HBA) can be used for the iSCSI protocol? (Select two.)
A. SW iSCSI initiator without a NIC (network interface card)
B. iSCSI HBA with TCP offload engine (TOE)
C. Fibre Channel HBA
D. NIC with SW iSCSI initiator
E. iSCSI HBA with TCP TOE SW iSCSI initiator
Answer: BD
6. What are typical examples of snapshot utilization? (Select three.)
A. replacement for traditional backups
B. protection against disk failures
C. protection against multiple hardware failures
D. protection against manual data deletion
E. file level restore without tape or backup software
F. source volumes for backup creation
Answer: DEF
7. Which statement about Virtual IP Load Balancing (VIPLB) is correct?
A. VIPLB is part of the Windows Solution pack.
B. VIPLB is a software driver installed on the host.
C. VIPLB replaces the iSCSI redirect function.
D. VIPLB directs iSCSI communication to the least busy storage node in the cluster.
Answer: D
8. Which statements about remote copy are correct? (Select two.)
A. Remote copy is always thin provisioned.
B. Remote copy can be synchronous and asynchronous.
C. Remote copy is an asynchronous replication of a volume.
D. Remote copies cannot be mounted.
E. Remote copy is asynchronous replication between different clusters only.
Answer: AC
9. Where is RAID configured in HP LeftHand SAN solutions?
A. at the volume level
B. at the storage node level
C. at the cluster level
D. at the management group level
Answer: B
10. Which statement is true about the iSCSI initiator?
A. The iSCSI initiator is only active during read operations.
B. The iSCSI initiator represents the LUNs.
C. The iSCSI initiator resides on the host and connects to the targets.
D. The iSCSI initiator is a software package running on the host.
Answer: C
Free Testking HP0-S18 HP ProLiant ML/DL Servers Exam Braindump
Free Testking HP0-S18 HP ProLiant ML/DL Servers Exam Braindump, hp0-s18 Exam name: Implementing HP ProLiant ML/DL Servers. Vendor:hp question and answers:460
latest update: Jun 11th 2009.
The intent of this guide is to set expectations about the content and the context of the exam and to help candidates prepare for it. Recommended training to prepare for this exam can be found at The Learning Center. This guide may contain supplementary references relevant to the topics covered by the exam.
HP0-S18 exam is for system engineers or technicians who require an in-depth understanding of the technologies deployed in HP ProLiant servers and computer professionals pursuing an HP Accredited Integration Specialist (AIS)
– ProLiant ML/DL certification. Examples of job roles:
HP Authorized Service Partner Systems Engineer
HP Solution Architect
HP Technical Client Consultant
After passing this exam, your achievement may be applied toward more than one certification. To determine which certifications will be credited with this achievement, log into The Learning Center and view the certifications listed on the exam’s More Details tab. You may be on your way to achieving
additional HP certifications.
The following are details about the exam:
Number of items: 60
Item types: Multiple choice, Hot Area, Drag and Drop
Exam Time: 90 minutes
Passing Score: 75%
Reference Material: No online or hardcopy reference material will be
allowed at the testing site.
Exam Content
The following testing objectives represent the specific areas of content covered in the exam. Use this outline to guide your study and to check your readiness for the exam. The exam measures your understanding of these areas.
Objectives
Section: Explain and recognize ISS technologies and solutions – 8%
Describe processor technologies
Describe memory technologies
Describe system architecture
Describe storage technologies
Explain network technologies
Section: Recognize and describe HP ISS products and solutions – 10%
Identify and describe server products
Describe health and fault management tools and
technologies
Identify and describe Remote Management offerings
Identify and describe rack solutions (including options)
Identify and describe network options
Identify and describe storage options
Identify and describe HP ProLiant Essentials (foundation &
value)
Section: Perform planning & design to achieve a deployable solution – 12%
Gather customer business requirements and existing
infrastructure data
Consider factors that might affect the solution
implementation
Determine if the new solution is deployable using the
existing resources.
Design, size and validate the solution
Section: Install, configure and upgrade ProLiant servers and options – 22%
Install the rack and its accessories
Install and configure server hardware and related options
Install and assemble external storage
Configure server hardware and related options
Install network operating system
Install and configure management software
Validate, test and document the solution
Section: Perform troubleshooting and repair/replacement procedures – 13%
Describe HP troubleshooting methodology- 6 step process
Gather information
Evaluate data to determine problem
Develop an appropriate action plan
Execute the action plan
Test if fault has been resolved using appropriate tools
Implement preventive measures by taking necessary steps to
insure the problem does not reoccur
Section: Use HP Unified Infrastructure Management – 16%
Use HP Systems Insight Manager (HP SIM)
Use ProLiant Essentials
Use Server Services
Section: Perform administrative and operational tasks (specific to ProLiant
servers) – 12%
Perform system upgrades
Determine and implement the appropriate fault
management solutions
Section: Identify and describe HP Service Offerings – 7%
Identify and describe HP Standard Warranties
Identify and describe HP Care Packs
1. Which drive technology should you recommend for a customer who wants a small form factor, at a lower
cost per gigabyte?
A. SATA
B. FC
C. PATA
D. SAS
Answer: A
2. A customer is running SUSE Linux Enterprise Server. Which Linux tool would you use to determine if the
memory system is bottlenecked?
A. vmstat
B. iostat
C. mstat
D. memconf
Answer: A
3. Which advantage does Hyper Threading Technology offer?
A. increases the number of execution units in CPUs
B. simultaneously executes different tasks using shared hardware resources
C. improves processor memory interaction
D. increases CPU clock speed operations
Answer: B
4. Which HP Care Pack service is included in Hardware Support?
A. 2-hour response time
B. next business day response time
C. system health checks
D. software product updates
Answer: B
5. What are the main features of PCI Express as compared to PCI-X? (Select two.)
A. point-to-point connections
B. increased bandwidth with parallel bit data transfer
C. plug & play technology
D.multiple lanes that are combined to increase bandwidth
E. full backwards compatibility with PCI Standard
Answer: AD
6. Which features are common to Fibre Channel and SAS technology? (Select three.)
A. dual port serial storage interface
B. supports external cable lengths of up to 15 meters
C. full duplex transfer
D. compatible framing structure
E. same number of supported devices
Answer: ACD
