Free Testking Cisco Data Center 642-359 ICSNS Exam Braindump, 642-359 Exam name: Specialist – Interaction Center/ Operational Analyst Design and Implement Exam. Candidates can prepare for this exam by taking the ICSN Implementing Cisco Storage Network and ICASN Implementing Cisco Advanced Storage Network course/s. This exam tests a candidate’s knowledge of The Cisco Storage Networking Solutions Support Specialist validates an individual’s knowledge of installing, configuring, and troubleshooting Cisco storage products to maintain a highly scalable, efficient, high performing storage networking environment. Cisco Storage Networking Support Specialist professionals understand how to deploy and optimize the features and benefits of the Cisco MDS 9000 Series Multilayer Directors and Switches, Cisco MDS 9509 Director Switch, Cisco 9216 Fabric Switch, and Cisco MDS 9120 products to provide fast and accurate resolution to network installation and customer service issues.. Topics covered include implementing appropriate IP configurations, Installing a Cisco Storage Solution, Implementing Cisco Storage equipment in multi-vendor multiprotocol environments, Implement the fabric design from the design document, Configuring security in a multiprotocol storage environment, Analyzing and tuning customer configurations to optimize application performance in multiprotocol storage networks and Troubleshooting SAN infrastructure.
The following topics are general guidelines for the content likely to be included on the Remote Access exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.
Implement appropriate IP configurations
Install a Cisco Storage Solution
Implement Cisco Storage equipment in multi-vender multiprotocol environments
Implement the fabric design from the design document
Analyze and tune customer configurations to optimize application performance in multiprotocol storage networks
Troubleshoot SAN infrastructure
1. While examining the output of a show run command on the Cisco MDS 9000 Series, you notice that the
statement interface GigabitEthernet2/1.2 appears in the output. What does this mean?
A. It refers to the second FCIP tunnel that is configured on port GigabitEthernet2/1.
B. It refers to a VLAN subinterface on port GigabitEthernet2/1.
C. It means that port GigabitEthernet2/1 is assigned to VSAN 2.
D. It is a mistake in the interface configuration.
Answer: B
2. The HBA on your storage server only supports the NL_Port mode. Which interface type on the Cisco
MDS 9000 Series fabric switches can support this HBA?
A. F
B. TE
C. FL
D. N
E. E
Answer: C
3. For purposes of granting restricted access to statically configure iSCSI virtual targets, which three of
these can be used to identify iSCSI initiators? (Choose three.)
A. iSCSI node name
B. host name
C. IPv4 address and subnet
D. MAC address
E. IPv6 address
F. iSCSI WWN
Answer: ACE
4. What is a benefit of enhanced zoning?
A. fabric locked during configuration changes
B. larger zoning database size
C. database rollback in case of failure
D. zones allowed to span VSANs
Answer: A
5. How many ports are addressable on a fabric arbitrated loop?
A. 126
B. 127
C. 255
D. 256
Answer: B
6. Which three of the following are possible reasons why a line card module does not come online?
(Choose three.)
A. Port indexes have been taken offline.
B. Available port indexes are noncontiguous.
C. Not enough power is available in the chassis.
D. An invalid interoperability mode has been configured.
E. Unsupported SFPs have been installed.
F. Not enough port indexes are available.
Answer: BCF
7. Which of the following tools would you use to view SCSI error count statistics?
A. Cisco Performance Manager
B. RMON
C. Cisco Traffic Analyzer
D. Cisco Fabric Analyzer
Answer: C
8. Why would you use the fcanalyzer command?
A. to ensure that Fibre Channel configuration settings are synchronized across all switches in the fabric
B. to identify common configuration errors in the fabric
C. to nondisruptively capture and decode Fibre Channel control frames
D. to decode and analyze Fibre Channel frames and ordered sets on a link
Answer: C
9. Which two features help you verify connectivity between host and storage devices? (Choose two.)
A. fcanalyzer
B. Cisco Traffic Analyzer
C. End-to-End Connectivity Analysis
D. Zone Merge Analysis
E. fcping
Answer: CE
10. Which feature detects hardware faults and attempts recovery actions?
A. Switch Health Analysis
B. Fabric Configuration Analysis
C. Online Health Management System
D. End-to-End Connectivity Analysis
E. Cisco Fabric Services
Answer: C