Cisco 350-001-Lab Study Materials with Actual 350-001-Lab Exam Answers
Q & A: 8 Cases
Updated: 2008-12-02
Price: 960 EUR 400 EUR
Product Description
Exam Number/Code: 350-001-Lab
Exam Name: CCIE-ROUTING AND SWITCHING QUALIFICATION (Lab exam)
Cisco 350-001-Lab ( CCIE-ROUTING AND SWITCHING QUALIFICATION (Lab exam) ) Certification Exam is of core importance both in your Professional life and Cisco Certification Path. Are you looking for actual 350-001-Lab exam answers? Pass4sure is your best choice. With the Pass4sure 350-001-Lab Study Materials, you not only get questions and answers as you may well expect from 350-001-Lab braindumps sites, but you will also get qualified and accurate explanations so that you get a firm grasp of the information.
Pass4sure GUARANTEES that you will pass your 350-001-Lab exam on your first attempt after using our p4s 350-001-Lab training Material. It could give a boost to your career by opening new horizons of employment opportunities.
Free Demo Download
Before you decide to purchase it, you can also get our free 350-001-Lab exam (CCIE-ROUTING AND SWITCHING QUALIFICATION (Lab exam)) demo to test the quality of our exam 350-001-Lab prep questions for real exam.
Some features about Pass4sure 350-001-Lab
Quality and Value for the 350-001-Lab Exam
Cisco 350-001-Lab () will provide you with exam questions and verified answers that reflect the actual exam. Furthermore, we are constantly updating our exam 350-001-Lab. Each candidate who decides to take the 350-001-Lab exam can receive the most reliable and up-to-date study materials here.
100% Guarantee to Pass Your 350-001-Lab Exam
If you do not pass the CCIE 350-001-Lab exam on your first attempt using our Pass4sure testing engine, we will give you a FULL REFUND of your purchasing fee. Our target is Pass 350-001-Lab For Sure.
Professional Service and Convenient Payment
The Cisco 350-001-Lab exam study materials in Pass4sure.eu are constantly updated to keep up with www.Pass4sure.com, and a professional sales team is also available to provide pre-sale and post-sale services for candidates for European candidates. The best feature of www.Pass4sure.eu is that we accept European dollars payment.
1. Two routers configured to run BGP have been connected to a firewall, one on the inside interface, and one on
the outside interface. BGP has been configured so the two routers should peer, including configuring the correct
BGP session endpoint addresses and the correct BGP session hop count limit (eBGP multihop). What is a good
first test to see if BGP will work across the firewall?
A. Attempt to telnet from the router connected to the inside of the firewall to the router connected to the outside of
the firewall. If telnet works, BGP will work, since telnet and BGP both use TCP to transport data.
B. Ping from the router connected to the inside interface of the firewall to the router connected to the outside
interface of the firewall. If you can ping between them, BGP should work, since BGP uses IP to transport packets.
C. There is no way to make BGP work across a firewall without special configuration, so there’s no simple test
that would show you if BGP will work or not other than trying to start the peering session.
D. There is no way to make BGP work across a firewall.
Answer: A
2. Spanning tree protocol calculates path cost based on what?
A. Interface bandwidth
B. Interface delay
C. Interface bandwidth and delay
D. Hop-Count
E. Bridge Priority
Answer: A
3. The ‘ip pim autorp listener’ command is used to:
A. Enable a Cisco router to “passively” listen to AutoRP packets without the router actively sending/forwarding
any AutoRP packets.
B. Allow AutoRP packets in the groups 224.0.1.39 and 224.0.1.40 to be Dense mode flooded out interfaces
configured as ‘ip pim sparse-mode’.
C. Enables the use of AutoRP on the router.
D. Configures the router as an AutoRP Mapping Agent.
Answer: B
6. You are the network administrator of an enterprise with a main site and multiple remote sites. Your network
carries both VOIP and data traffic. You agree with your service provider to classify VOIP and data traffic
according to the differentiated services RFCs. What are valid combinations :
A. Data marked with DSCP AF21, VOIP marked as DSCP EF
B. Data marked as DSCP AF51 and VOIP marked DSCP EF
C. Data marked with DE-bit, VOIP marked with CLP-bit
D. VOIP marked with DSCP AF31, data marked with DSCP EF
E. Data marked with ip precedence 5, VOIP marked with DSCP EF
Answer: A
9. In order to create a fully-meshed Frame Relay network with point-to-point links between 10 sites, how many
links would be needed?
A. 10
B. 20
C. 35
D. 45
E. 60
Answer: D
10. Which statement is FALSE with regards to WCCP version 2?
A. It allows redirection of traffic other than HTTP, including a variety of UDP and TCP traffic.
B. Only one router can redirect content requests.
C. Multiple routers can redirect content requests.
D. It works only with IP networks.
Answer: B
11. If you have a large amount of alignment errors, FCS errors, or late collisions, this may indicate:
A. A half-duplex connection between the switch and an end-point on a 10/100/1000Base-T Ethernet link
B. These errors are normal under most circumstances
C. There is a duplex mismatch on a 1000BASE-LX/LH
D. Duplex Mismatch on a 10/100/1000BASE-T Ethernet link
Answer: D
19. You have attempted to configure OSPF v3 between two routers over Frame Relay and your adjacency has
failed to establish. What is the problem?
A. You have failed to map the all routers multicast address to the DLCI
B. You have failed to map the solicited node multicast address to the DLCI.
C. You have failed to map the neighbor’s link local address to the DLCI.
D. You have failed to map the all routers broadcast address to the DLCI.
Answer: C
20. When determining your security policies for deploying Unicast Reverse Path Forwarding (uRPF) on your
network, which is NOT an action that uRPF can perform?
A. uRPF examines all packets received to make sure that the source address and source interface appear in the
routing table and match the interface where the packet was received.
B. uRPF checks to see if any packet received at a router interface arrives on the best return path.
C. You can have an ACL configured and combined with your uRPF configuration.
D. uRPF events can be logged by specifying the logging option for the ACL entries used by the Unicast RPF
command.
E. uRPF inspects IP packets encapsulated in tunnels, such as GRE.
Answer: E
21. What are the three types of LMI that can be configured to be used with frame-relay on a Cisco router?
(Choose 3)
A. Cisco
B. ANSI – Annex D
C. Q.931 – Annex B
D. Q.933 – Annex A
Answer: ABD
22. What does the Cisco Spanning Tree Root Guard feature provide in a bridged network?
A. It ensures that the bridge is elected as root bridge in the network.
B. It enforces the root bridge placement in the network.
C. It ensures that BPDUs sent by the root bridge are forwarded in a timely manner.
D. It ensures that all ports receiving BPDUs from the root bridge are in the forwarding state.
Answer: B
23. Which fundamental modifications, related to traffic forwarding, does MPLS introduce? (Choose 2)
A. IP lookup is done on every hop with the MPLS core.
B. IP destination routing is reduced to label lookup with the MPLS network.
C. For unicast routing, labels are assigned to FECs (i.e.: IP prefixes).
D. For multicast routing, labels are assigned to IPmc groups.
Answer: BC
24. Which of the following parameters are used to determine a FEC (Forwarding Equivalent Class)? (Choose 2)
A. IP Prefix
B. Layer 2 circuit
C. RSVP request from CE for bandwidth reservation
D. BGP MED value
Answer: AB
What are two main reasons for customer to implement Cisco Clean Access? (Choose
Two.)
A. Integrated network intelligence for superior event aggregation, reduction and
correlation
B. Enforcement of Security Policies by making compliance a condition of access
C. Provision of secure remote access
D. Significant cost savings by automating the process of repairing and updating user
machines
E. Focus on validated incidents, not investigating isolated events
F. Implementation of NAC Phase-1
A: High Availability
B. Complex Operations
C. Single-element management
D. Responsibility sharing
E. Multiple cross-vendor management platforms
Availability
B. Complex Operations
C. Single-element management
D. Responsibility sharing
E. Multiple cross-vendor management platforms